User guide

For the person who uses the page. The book control in the page header shows this file.

What this page is for

You are building the locations for a warehouse, or for a new part of one. This page lets you draw a rectangle over each rack on your floorplan, name the locations from a short wizard, and import them into Fishbowl. The drawing stays with the project, so the floorplan shows you what you have built and what you have not.

Start here

  1. Choose your Location group at the top of the page, and name the project.
  2. Click Load floorplan and pick a PDF or an image. You can skip this and draw on the blank canvas.
  3. Drag a rectangle over a rack. The wizard opens.
  4. Set the aisle, the racks, and the shelves. The names appear under Preview.
  5. Click Apply, then Save project.

The Locations to build table now shows every location you are about to create.

Common tasks

Name a region

Each region uses four levels: aisle, rack, shelf, and bin. Turn on the levels you need and leave the rest off. A level has a style, a starting value, and a count.

For example, aisle A, 6 racks, and 4 shelves gives you A.01.01 through A.06.04, which is 24 locations.

Bins are always numbers. Aisles, racks, and shelves can be letters or numbers.

Set the walk order

The order of the region list is the order a picker walks the floor. Use the arrows beside a region to move it up or down. The Sort order column in the review table follows, and Fishbowl uses that number to order a pick list.

Inside a rack, choose Top down or Bottom up to say which shelf a picker reaches first.

Import into Fishbowl

Check the review table, then click Import into Fishbowl. The page sends one import for each region. A region turns green when it succeeds, and red when it fails.

If a region fails, read the import log at the bottom of the page. Fix the problem, then import again. Importing a region twice is safe: Fishbowl updates the locations instead of making a second copy.

Save and reopen a project

Click Save project to download the project file. It holds your floorplan, your regions, and your settings.

Click Open project to load one back. You can send the file to a colleague, and they can carry on where you stopped.

Every control

ControlWhat it does
Location groupThe Fishbowl group your locations are built into.
SeparatorThe character between the parts of a name, such as the dot in A.01.01.
Pad numbers, WidthWrites 01 instead of 1, so your locations sort in walking order.
ProjectNames the project. The saved file takes this name.
Open project, Save projectLoads a project file, or downloads one.
Load floorplanReads a PDF or an image. A PDF with several pages asks which page to use.
ClearRemoves the floorplan. Your regions stay.
−, Fit, +Zooms the canvas out, to fit, or in.
The canvasDrag to draw a region. Click a region to select it. Double click it to edit it.
Regions, in walk orderYour regions in pick order. The arrows move one. Edit reopens the wizard.
Locations to buildEvery location you are about to create, with its sort order.
Import into FishbowlSends the locations. One import for each region.
CopyCopies the import log, to paste into a support request.
UnsavedAppears beside the project name while you have work you have not saved.
The badge beside the titleAppears only in demo mode, where nothing you do reaches Fishbowl. Connected to Fishbowl, there is no badge.
?Runs the guided tour.
GearOpens Settings. An administrator sets the defaults here.
BookShows this guide.

Questions people ask

Do I need a floorplan?

No. The canvas works empty, and you can draw the racks from memory. A floorplan makes it easier to see what you have covered.

Can I delete a location I created by mistake?

Not from this page. It creates locations and updates them, and it never deletes one. Remove the location in Fishbowl. If the location already holds inventory, ask your administrator before you remove anything.

Why is my name rejected?

A location name is 30 characters at most, and it cannot contain a hyphen. Fishbowl reads a full location as Group - Location, so it keeps the hyphen for itself. The wizard warns you before you apply, and the panel above the review table lists every name that would fail.

What happens if I import twice?

Fishbowl updates the location that already carries the name. You do not get a second copy, and it is safe to import a region again after you fix another one.

Why did my whole import fail for one bad location?

Fishbowl imports a file completely or not at all. The page sends one import for each region to keep that cost small, and checks every name before it lets you import.

Why is the page dark?

The page follows your Fishbowl client. If the client is set to a dark theme, so is this page. There is nothing to set here.

The page closed and my work is gone.

The project lives in the file you save, and the page saves nothing on its own. Save the project file whenever you stop. An Unsaved badge sits beside the project name while there is work you have not saved.